Thank's for everyone who wisited us at Essen Schweissen & Schneiden!

Generic filters



The CYCLONE 200E is state-of-the-art for welding MIG steels. The machine is suitable for both enthusiasts and demanding professional welders. Reliability is top notch.

*Standard 15 series Mig burner. Standard feed roller: V 0.6 – 0.8

*Digital IGBT inverter with technology
*Bright digital LCD display
*PowerSet function, only the wire thickness and material thickness need be specified for correct adjustments.
*15 series Mig burner.
*Simple easy settings
*Minor splash
*180A MIG with 25% burn time
*200 Max amps
*Burn time / Overcurrent protection (Auto-stop)
*Spool gun opportunity
* 1-phase 240V
* The weight of the machine is 13.5 kg

*Dimensions:  45.5 cm × 22.5 cm × 33 cm

Attention buyer!!
USA and Europe packaging is slightly different!!
The European package does not include the throttle.


1.015,00 inc. VAT

Stock level:

in stock

Warranty: 2 years


Type:  Analog IGBT Inverter
Output /Process Type:  MIG
Voltage/phase:  240V  1 PHASE
Max Rated MIG Amps:  240V:  200A
MIG Amps/Volts @ Rated Duty Cycle:  240V: 180A/23V @ 25% Duty Cycle/40º C
Max Inrush ( I1MAX ) Amps:  240V:  28.2A
Maximum Rated (I1EFF ) Input Amps:  240V:  15A
OCV:  70V
MIG Output Range:  240V:  30A-200A/15.5V-24V
Variable MIG Inductance/Stick Arc Force Control:  No
Spool Gun Capable:  Yes
Pulse:  No
Standard Drive Roll wire size:  0.6 – 0.8 mm
Separate wire feeder:  No, self contained
Number of Drive rollers:  2
Max Wire Feed Speed:  480IPM (No Load)
Max Wire Roll Diameter:  20 cm (up to 5 kg )
Memory:  No
Preflow time:  Auto
Post Flow Time:  Auto
Flux Core:  Yes, Optional
Other Features: 15 series MIG Gun (appearance may vary from depicte)
Dimensions:  45.5 cm × 22.5 cm × 33 cm
Weight: 13.5 kg


The Cyclone 200E has been designed with simplicity of use in mind. The new Powerset mode eliminates the guess work required when setting up the machine.  No longer do you need to refer to charts, apps, or need years of experience to set the unit up.  It simply does it for you.  All you need to know is the gas type, wire diameter and metal thickness that  you are welding.  Select that on the front panel, and you have instant settings that give you a workable setting.  Now, with that said, you won’t feel limited by that setting, if you need to make adjustments.  The unit allows plenty of adjustment room, without letting you go too far off track.   If you are a seasoned professional, of course, the unit also has a manual mode.  This unit has “economy” in mind as it offers just the MIG process with 180A of output at 25% duty cycle. This is more than enough for your small garage or shop, and still  as good as or better than the duty cycle of many other 200A class welders on the market.  With Dual voltage operation capability, the small frame of the Cyclone 200E allows you to be completely portable and weld up to 125A on 230V output



If operating with a generator, use a generator rated for at least 7000 surge watts. Make sure that it is certified by the generator manufacturer to produce “clean power”.  The threshold for clean power is typically  <5% THD (Total Harmonic Distortion).  Operating on non clean power generators, poor sources of power, including under/over voltage (10% over/under voltage) or extension power cords that are undersized will void the warranty.

If welding aluminum, you must use 0.9 mm diameter wire for best results with main gun, U groove drive rolls (optional) and polymer liner (optional) or spool gun. Recommend spool gun is SM100(optional).


* Weld up to a maximum of 2.5 mm Steel/Stainless single pass weld* 240V
* Weld up to a maximum of 7.6 mm Steel/Stainless multiple pass weld 240V
* Weld a minimum of 24 gauge Steel/Stainless 240V
* Purchase the SM100N gun to weld Aluminum or purchase a 0.9 /1.0 mm 1 piece drive roll kit to weld aluminum along with a                   polymer liner for the standard 3 m gun.