POWERPLASMA 60S
We have a small number of Plasma 60S demos left, the predecessor to the Plasma 62i.
A reliable machine for both enthusiasts and professionals. Plasma 60S is 400 V 3-phase.
He is suitable for work in workshops, farms and at home.
Thanks to the pilot arc ignition, cutting is easy even for a beginner.
The machine can be supplemented with a Trafimet A81 burner, which, due to its durable materials, is more suitable for professional use. This device is not suitable for a CNC bench, but is intended for manual cutting of metal.
€1.105,00 €850,00 inc. VAT
Stock level:
in stock
Warranty: 2 years
TECHNICAL DATA
• 60A max power with 60% burn time
• Cutting capacity recommended 15 mm, max ~ 22 mm steel
• Pilot arc ignition
• Air consumption: ~ 200L / min 4.5-5 bar
• Burner AG-60
• 3-phase 16A fuse
• Weight 22 kg
Dimensions: 56 cm × 23 cm × 43 cm
DESCRIPTION
A reliable machine for both enthusiasts and professionals. The machine is a 400V 3-phase and is therefore suitable for the field even if long hangs are used and the electricity is of poor quality.
Thanks to the pilot arc ignition, cutting is easy even for a beginner, and even tight spaces are out of reach.
The machine can be upgraded with a Trafimet A81 burner, which is more suitable for professional use due to its durable materials.
DOWNLOADS
PRODUCT NOTES
To improve consumable life and prevent torch damage, the customer must supply and install a separate air dryer inline in addition to the regulator/water trap supplied by Everlast. The water trap Everlast supplies with the unit is not designed to remove all moisture from the air.
When using on a generator, the generator must be “clean power” rated by its manufacturer, which is 5% or less Total Harmonic Distortion (THD). Failure to operate on a clean power rated generator will damage the unit and void the warranty. For more generator information and recommendations, consult the manual.
MINIMUM/MAXIMUM
- Up to 3/4″ daily use @ 15-20 ipm
- Up to 1″ clean cut @ 8-12 ipm
- Up to 1 1/4″ severance cut @ 3-5 ipm
- Pierce up to 1/2″
Plasma cutting capacity is affected by several factors. Ideal cutting conditions require dry air, new consumables, proper air pressure, etc. Quality of cut depends upon consumable orifice size, standoff height, and travel speeed.