Thank's for everyone who wisited us at Essen Schweissen & Schneiden!

Generic filters



The Power TIG 210EXT is a top-equipped AC / DC tig for welding both steels and aluminum. The machine is suitable for both enthusiasts and demanding professional welders. Reliability is top notch.

The machine has a PFC circuit, which means that long extension cables do not affect the welding properties. In digital control, 9 memory locations for settings.

With gas-cooled WP26 burner as standard.

For professional use, we have equipped the machines with high-quality Tafimet burners, so that the package satisfies even the most demanding taste.

Attention buyer!!
USA and Europe packaging is slightly different!!
European packaging includes: gas-cooled tig torch with consumables, electrode holder and ground clamp.

1.769,00 inc. VAT

Stock level:

In stock.

Warranty: 2 years


IGBT Type:  Module IGBT
Inverter Type:  Digital/Micro-controlled
Output Type:  AC/DC, TIG, DC, Stick
Voltage/phase:  240 V 1 PHASE
Max Rated TIG Amps:  210 A
Max Rated Stick Amps:  160A
TIG Amps @ Rated Duty Cycle:
@240V: 210A/18.4V @ 60% Duty Cycle/ 40° C
Stick Amps @ Rated Duty Cycle:  240V
160A/26.4V @ 60% Duty Cycle/ 40º C
130A/25.2V @100% Duty Cycle/40°
Max Inrush ( I1MAX ) Amps: 240V: 31A
Maximum Rated (I1EFF ) Input Amps:  240V:25A
OCV:  70V/<24V with VRD
TIG Output Range DC:
240V: 3A-210A/ 10.1V-18.4V

TIG Output Range AC:
240V:  5A-210A/10.2V-18.4V

Stick Ouput Range DC:
240V: 20A-160A/ 20.8V-26.4V
Stick Hot Start Amps:  0-100%
Stick Function:  Adjustable Arc Force Control
Stick Hot Start Type:  Adjustable Hot Start
Stick Hot Start Time:  0-2 Seconds
6010/Cellulose Capable:  Limited to 6011
Minimum Amp DC TIG Start:  5A
Minimum Amp AC TIG Start:  5A
TIG Start Type: HF
Lift TIG
TIG Start Type:  HF and Lift Start
Memory:  Yes
Initial amplifier:  240V
DC: 5-210A
AC: 5-210A

End Amp Range:  240V
DC: 3-210A
AC: 5-210A
Upslope Time:  0-25 Seconds
Down Slope Time:  0-25 Seconds
Preflow time:  0-25 Seconds
Post Flow Time:  0-50 Seconds
TIG Pulse:  Yes
Standard DC Pulse Frequency:  .1-500 Hz
Standard AC Pulse Frequency:
.1-250 Hz Advanced Square Wave

.1-10 Hz Soft Square, Triangular

AC Advanced Pulse Frequency:  .1-10 Hz
Pulse Time On (Duty Cycle):  5-100%
Pulse Amp Range:  5-99% of Welding Amps
AC Frequency (Hz):  20-250 Hz
AC Balance Range:  5-90% of EP (+)
AC Wave Forms:
Advanced Square Wave
Soft Square Wave
Remote Control:  2T/4T with Torch Amptrol settings

Weight: 28 kg

Dimensions: 56 cm x 23 cm x 43 cm


If you are wondering what having digital microprocessor control can mean, just ask anyone who has used it.  The benefits are numerous, whether its increased productivity, or increased weld quality, or the ability to make precise settings, and fine tune them to the exact standards required.  This is all part of the benefit of owning a PowerTIG 210 EXT.  This TIG/Stick welder from Everlast also features IGBT inverter technology which offers the best in arc stablity and performance while reducing size and weight.  The unit features wave form control with three distinct wave forms: Advanced Square wave, Soft Square wave, and Triangular.  These help to offer flexibility while welding Aluminum.  But that’s just part of the story.  This TIG/Stick welder also features programmable memory, adjustable AC Frequency, and adjustable AC balance control.  It also works quite well as a stick welder featuring items like adjustable hot start and arc force control for maximum welding flexibility.  The heavy duty HF arc start design reduces traditional HF component maintenance issues.  The unit also features two pulse modes, standard and advanced pulse.  In the advanced pulse mode the welder oscillates between AC and DC- polarity allowing fine fast freeze control on thin gauge aluminum, and greater penetration on thick plate aluminum.   Although the unit may seem quite complex in its list of features, it’s really quite simple due in part to the intuitive design which leads to quick and easy to setup whether you are a welding professional or just an enthusiast.



For generator use:  Use only generators that are certified as “clean power” by the manufacturer.  This means that the unit has <10% total harmonic distortion (THD).   For operation on 240V, use a generator that is rated for 7500 surge watts or greater.

This unit is not recommended for use with E6010 electrodes and most rods with a cellulose-based flux.  Use E6011, if a cellulosic rod is required.



Weld steel to a maximum of 5/16″ single pass (240V)
Weld steel to a maximum of 5/8″ multi-pass (240V)
Weld aluminum to a maximum of 1/4″ single pass (240V)
Weld aluminum to a maximum of 1/2″ multi-pass(240V)

Maximum Figures for stick is based off of standard industry practice and practical limits for quality welds.


Weld with a minimum of 1/16″ diameter electrode
Weld with a maximum of 1/8″ diameter electrode (240V)
Not rated for E6010 use

Max electrode size ultimately depends upon class/type and manufacturer recommendations and formulations and may vary from brand to brand and class to class.